ABOUT THE 2 BEAM STARTER KIT
The Kwêbeams All-in-One starter kit has been designed to be effective & easy to install. The kit includes the following:
- 2 wireless motion sensors with batteries
- 2 built-in sirens
- 2 mounting brackets with fasteners
- KwêHub (WiFi) with built-in battery backup and charger.
A fully programmable built-in siren in each sensor provides an unexpected element of surprise next to an intruder. The siren settings can be adjusted to mute the siren, or sound for a defined delay period. No additional siren installation is required.
The outdoor motion sensor features dual PIR detection to ignore pets & detect people. Both top & bottom detectors must sense a moving heat source for a valid alarm signal. False alarms are further reduced with software algorithms to differentiate true detection from environmental noise.
The system is completely wireless and powered from standard AA alkaline cells. All wireless beams can transmit & receive signals up to 1km line of sight. Built-in repeater functionality further strengthens wireless performance and overcomes wireless range issues.
A Tilt sensor reports orientation changes while the system is armed or disarmed. To prevent theft & vandalism the built-in siren will sound when the sensor is forcibly removed.
The sensors communicate to the kwêHub, which connects to WiFi to give authorized users full access to the Kwêbeam system from the mobile App. The Kwêbeam system can also be controlled directly from the KwêHub if there is no internet connection available.
The Kwêhub allows real-time communication between the sensors and the Kwêbeams APP. It immediately sends an alarm notification to all users registered on the system.A Built-in awareness buzzer will sound unique tones on the for individual zones.
The KwêHub includes a built-in lithium battery with power fail notifications during loadshedding.
The Mobile APP gives full control over the Kwêbeams Early Warning System, from anywhere in the world. Control your home, office, Holiday home or Farm and all other Kwêbeams systems from one single APP.
MAIN FEATURES: |
Ready to operate out of the box |
Easy DIY installation within 30 minutes |
4 x Dual wireless motion sensors. 18m detection range, 90 degrees wide |
4 x 95 decibel built-in Sirens (Fully programmable) |
Orientation protection: Any change in the orientation will trigger the built-in Siren, whether the system is Armed or Disarmed |
Includes 4 x brackets with fasteners |
All batteries included (Last up to 3 years) |
Full Kwêbeam system control via the KwêBeams Mobile App |
2-Way wireless communication up to 1000m between devices |
Built-in awareness buzzer on the KwêHub will sound unique tones for individual zones |
Support two arming modes, each with individual bypass and siren settings |
Panic button activates all built-in sirens that gives an unexpected element of surprise next to an intruder |
Instantly adjust detector sensitivity levels, siren settings or any other setting on all connected devices |
KwêHub includes Built-in lithium battery with power fail notifications: – 16 hours backup in normal mode (WiFi and LTE is connected) – 24 hours backup in low power mode (LTE connected) – Up to 3 months operation directly from the KwêHub (WiFi and LTE not connected) |
Automatic software updates |
2 Year warranty |